A nonstandard finite difference scheme for contaminant transport with kinetic langmuir sorption

This study focuses on a contaminant transport model with Langmuir sorption under nonequilibrium conditions. The numerical instabilities of the standard finite difference schemes including the upwind method are investigated. By using the nonstandard finite difference method, a better finite difference model is constructed. The numerical simulation on a specific system configuration proves the advantages of the new finite difference model. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 27: 767–785, 2011     

Bending and vibration of an electrostatically actuated circular microplate in presence of Casimir force

The pull-in instability and the vibration for a prestressed circular electrostatically actuated microplate are investigated in consideration of the Casimir force. Based on von Kármán’s nonlinear bending theory of thin plates, the governing equations for the whole analysis are decomposed into two two-point boundary value problems. For static deformation of the plate, the geometric nonlinearity is involved and the pull-in parameters are obtained by using the shooting method through taking the applied voltage or Casimir parameter as an unknown. This algorithm is also used to study the small amplitude free vibration about the predeformed bending configuration following an assumed harmonic time mode, and the variation of the prestress and Casimir parameters dependent fundamental natural frequency with the applied voltage is presented. Several case studies are compared with available published simulations to confirm the proposed method. The influences of various parameters, such as the initial gap-thickness ratio, Casimir effect, prestress on the pull-in instability behavior and the natural frequency are examined.     

A nonlinear PSE method for two-fluid shear flows with complex interfacial topology

A nonlinear stability method is developed for laminar two-fluid shear flows which undergo changes in the interface topology. The method is based on the nonlinear parabolized stability equations (PSE) and incorporates a scalar-based interface capturing (IC) scheme in order to track complex deformations of the fluid interface. In doing so, the formulation retains the flexibility and physical insight of instability-wave based methods, while providing hydrodynamic modeling capabilities similar to direct numerical calculations: the new formulation, referred to as the IC-PSE, can capture the nonlinear physical mechanisms responsible for generating large-scale, two-fluid structures, without incurring heavy computational costs. This approach is valid for spatially developing, laminar two-fluid shear flows which are convectively unstable, and can naturally account for the growth of finite amplitude interfacial waves, along with changes to the interfacial topology. We demonstrate the accuracy of the IC-PSE against direct Navier–Stokes calculations for two-fluid mixing layers with density and viscosity stratification. The comparisons show that the IC-PSE can predict the dynamics of the instability waves and capture the formation of Kelvin–Helmholtz vortex rolls and large scale liquid structures, at an order of magnitude less computational cost than direct calculations. The role of surface tension in the IC-PSE formulation is shown to be valid for flows in which Re/We ? 1, and the method accurately predicts the formation and non-linear evolution of flow structures in this limit. This is demonstrated for spatially developing mixing layers which lead to vortex roll-up and ligaments, prior to droplet formation. The pinch-off process itself is a high surface tension phenomenon and in not considered herein. The method also accurately captures the effect of interfacial waves on the mean flow, and the topology changes during the non-linear evolution of the two-fluid structures.     

Akhmediev breather evolution in optical fiber for realistic initial conditions

We study numerically Akhmediev breather dynamics in optical fibers under initial conditions that do not correspond to an ideal infinitesimal modulation on a plane wave. We examine two modifications that are commonly encountered in realistic experiments: (i) a finite-amplitude (not necessarily weak) initial modulation; (ii) the use of pulsed excitation. In the first case, we derive an expression for the propagation distance required to generate a train of compressed breather pulses. In the second case, we show that breather dynamics with pulsed excitation can be interpreted in terms of local breather states at different points on the pulse envelope.     

Condition for convective instability of dark solitons

Simple derivation of the condition for the transition point from absolute instability of plane dark solitons to their convective instability is suggested. It is shown that unstable wave packet expands with velocity equal to the minimal group velocity of the disturbance waves propagating along a dark soliton. The growth rate of the length of dark solitons generated by the flow of Bose-Einstein condensate past an obstacle is estimated. Analytical theory is confirmed by the results of numerical simulations.     

微小圆管中分裂火焰的实验与理论研究

对丙烷/空气在内径2 mm的圆管内的预混燃烧进行了实验研究,借助于高速数码摄像机发现了分裂火焰现象,其中一个为向上游传播的较亮的常规火焰,另一个为向下游传播的较暗的微弱火焰。这些火焰先后熄灭,经过一段时间后又重复发生自着火、分裂、反向传播、灭火过程。这种现象在富燃、化学恰当比以及贫燃火焰中都有存在。一维非稳态计算表明化...     

INSTABILITY OF TOROIDAL MEMBRANE WITH LARGE TENSILE DEFORMATION

In this paper,the problem of large axisymmetric deformation of hyperelasticmembrane is reformulated on the basis of the general theory of finite elasticity.From thefundamental equations derived here,the tensile instability of toroidal rubberlike membranewith Mooney-Rivlin’s model constitutive relation is solved by using the shooting method.The upper and lower limit loads and the response curve of the displacement to the load aregiven.     

Instabilities in two-liquid layers subject to a horizontal temperature gradient

We study theoretically the stability of two superposed fluid layers heated laterally. The fluids are supposed to be immiscible, the interface undeformable and of infinite horizontal extension. Combined thermocapillary and buoyancy forces give rise to a basic flow when a temperature difference is applied. The calculations are performed for a melt of GaAs under a layer of molten B₂O₃, a configuration of considerable technological importance. Four different flow patterns and five temperature configurations are found for the basic state in this system. A linear stability analysis shows that the basic state may be destabilized by oscillatory motions leading to the so-called hydrothermal waves. Depending on the relative height of the two layers these hydrothermal waves propagate parallel or perpendicular to the temperature gradient. This analysis reveals that these perturbations can alter significantly the liquid flow in the liquid-encapsulated crystal growth techniques. PACS 47.20.Dz, 47.20.Bp, 47.54.+r, 47.27.Te, 44.25.+f, 47.20.Ma     

Instability of a Collision Surface During High-Velocity Impact

The physical mechanisms of development of hydrodynamic instability during high-velocity impact are analyzed analytically and using numerical simulation. A new mechanism of development of instability based on the assumption of the existence of initial perturbations on the surfaces of the colliding plates is proposed. The progressive displacement of the maximum of the specific surface mixed mass from the shortwave to the longwave spectrum range and the self-similarity of the variation of the interface are established.